Merkez Basınçlı Taşlama ve Parlatma Makinesi -

Product Model

UNIPOL-1200S

Installation Conditions

1. Temperature and humidity: 10-85%RH (at 25℃ without condensation) Temperature: 0-45℃.

2. There is no strong vibration source and corrosive gas around the pressure controlled auto lapping polishing machine.

3. Power supply: Single phase: AC220V、 50Hz national standard three-pole socket 10A (the socket must have a good safety protection grounding wire).

4. Cooling water: The pressure controlled auto lapping polishing machine is equipped with a water inlet and a water outlet, and you need to connect the tap water and drainage pipelines by yourself.

5. Air source: No requirement for standard equipment.

6. Workbench: It is recommended to use pressure controlled auto lapping polishing machine on a workbench or desktop with a load-bearing capacity of more than 150kg.

7. Ventilation device: Good ventilation environment, no special ventilation device requirements are required.

8. Auxiliary equipment (purchased separately):

Recommended:

1. HEATER-3040 or 250 heating platform.

2. SKCH-1 precision thickness gauge.

3. GPC-80A/100A precision grinding and polishing controller (manipulator).

4. SZKD-series dripper.

5. SKCS-1 blow dryer.

Main Parameters

(Specification)

1. Power supply port of polishing machine for research laboratory: AC220V, 50Hz.

2. Total power of automatic pressure polishing machine: 550W.

3. Diameter of grinding and polishing disc: Φ300mm.

4. Diameter of fast card sample loading plate: Φ160mm.

5. Diameter of gravity sample loading plate: Φ105mm (flat surface).

6. Number of lower swing stations (swinging mechanical arm): 1 station.

7. Main drive motor of upper plate: DC110V 90W (reduction motor).

8. Main drive motor of lower plate: DC110V 400W.

9. Speed of upper sample loading plate: 10-80rpm (speed adjustable).

10. Speed of lower grinding and polishing disc: 20-240rpm (speed adjustable).

11. Pressure range of upper sample loading plate: Setting range: 0.5-20Kg.

12. Control method of polishing machine for research laboratory: PLC programmer + Touch screen.

Product Specifications

13. Product specifications:

Size: 460mm×660mm×760mm;

Weight: ≈95kg.

1

Cast Iron Polishing Plate

1 pcs

2

Cast Aluminum Polishing Plate

1 pcs

3

Quick Card Loading Plate

1 pcs

4

Gravity Sample Plate

1 pcs

5

Condition Ring

1 pcs

6

Magnetic Sheet

2 pcs

7

(Steel) Lapping Buffer Sheet

2 pcs

8

Sandpaper (240#, 400#, 800#, 1500#)

2 pcs each

9

Polishing Pad

(Nubuck Leather, Synthetic Leather, Polyurethane)

1 pcs each

10

Diamond Polishing Paste (W2.5)

1 pcs

1

SKZD-2 Slurry Feeder

(optional)

2

SKZD-3 Slurry Feeder

(optional)

3

SKZD-4 Automatic Slurry Feeder

(optional)

4

SKZD-5 Slurry Feeder

(optional)

5

YZXZ-12 Stirring Circulation Pump

(optional)

6

Precision Thickness Gauge

(optional)

7

GPC-80A Precision Polishing Controller

(optional)

8

Ceramic Lapping Plate

(optional)

9

Glass Lapping Plate

(optional)

10

Magnetic Resin Diamond Polishing Disc

(optional)

11

Wax-free Lapping Plate

(optional)

12

Peach-shape Hole Sample Holding Plate (φ105mm)

(optional)

13

Special Fixture for UNIPOL-1200S Pressure Lapping Machine

(optional)